Arvore de Natal API 6A
Well Control System
Cabeca Casing API 6A
Cabeca Tubing API 6A
Casing Head Housing
Casing Head Spool
Tubing Head Spool
Tubing Head Adapter
Injection Wellhead
Thermal Wellhead
Casing Hangers
Tubing Hangers
Crosses & Tees API 6A
Clamp Connections
Double Studded Adapter
Flanges API 6A
Spools API 6A
Choke API 16C
Choke Ajust. API 6A
Retencao API 6A
Check Dart API 6A
Valv. SSV
Choke Manifold API 16C
Kill Manifold API 16C
5-Valve Plug Choke
Choke Panel
Annular BOP API 16A
Ram BOP API 16A
Sand Trap
Sand Filter
Pup Joints API 6A
Swivel Joints API 6A
Coletor Residuos
Coletor Barril Unico
Manual Tongs API 7K
Manual Tongs 7K
Manual Tongs Type C
Manual Tongs Type DB
Manual Tongs Type LF
Manual Tongs Type HT
Manual Tongs Web Wilson
Extd. Casing Tong 7K
Tubing Power Tongs
Drill Pipe Power Tongs
No-Marking Power Tong
Iron Roughneck RT-100
NJ-S Hydraulic Bucking Unit
Hydraulic Power Units
Spinning Wrench SSW40
Spinning Wrench 7K
Swivel Rotativo 8C
Pneumatic / Hidraulico • Q140-200 / Q254-250 / Q254-300Y • 3-1/2″ a 10″ • Aco Manganes
| Caracteristica | Descricao |
|---|---|
| Substitui Spinning Rope | Mecanizacao completa, elimina cordas / correntes perigosas em drilling floor. |
| Wide Adjustable Range | Abertura ajustavel a range de drill pipe – sem trocar rolo. |
| Pneumatic / Hidraulico | Modelos pneumaticos (Q140-200, Q254-250) ou hidraulicos (Q254-300Y). |
| Alta Manganese Steel | Pneumatic Pads com anti-impacto, alta durabilidade. |
| 4-Drive Rollers | 4 rolos de alta aderencia com forca centrifuga distrib. |
| Air Cylinder Clamping | Clamping pneumatico via forca centrifuga / ar comprimido. |
| Safe Operation | Reduz risco pessoal durante make-up / break-out. |
| API 7K Standard | Manufacturado conforme API Spec 7K. |
| Caracteristica | Spinning Rope / Chain | Spinning Wrench API 7K |
|---|---|---|
| Seguranca | Alto risco (corda rebenta, atinge worker) | Alta (clamping mecanizado) |
| Velocidade | Manual (5-10 min per joint) | Motor-driven (1-2 min per joint) |
| Esforco Fisico | Alto (multiplos workers) | Minimo (1 worker controla) |
| Confiabilidade | Varia com skill | Constante (automatico) |
| Range Diametros | Limitado | 2-7/8″ – 10″ (ajustavel) |
| Custo inicial | Baixo | Alto (mas ROI rapido) |
1. Posicionar a Spinning Wrench verticalmente 0.3-0.5m acima do drill pipe coupling (elevator joint).
2. Swing a wrench sobre o pipe, centralizando os 4 drive rollers em torno do pipe.
3. Operar handle do combination valve (right) – air spring pressiona rolos contra o pipe.
4. Operar left handle – air motors iniciam (right + left motors funcionam).
5. Atraves da reduction gear, drive rollers giram – pipe gira por friccao.
6. Drill pipe joint e screwed in / out automaticamente.
7. Para dimensoes diferentes de pipe, ajustar a abertura da wrench (sem trocar rolo).
Air motors: Reversiveis (clockwise + anticlockwise) – facilita coring + fishing operations.
| Componente | Material | Funcao |
|---|---|---|
| Drive Rollers (4x) | High Manganese Steel | 4 rolos rotativos que impelem o drill pipe por friccao |
| Air Motors (2x) | Aluminium + Steel | Direita + esquerda reversiveis (0-90/120 RPM) |
| Reduction Gearbox | Aco liga cementado | Reduz velocidade do motor + aumenta torque |
| Air Cylinder (Clamping) | Aco inox / Aluminium | Pressiona rolos contra pipe por ar comprimido |
| Combination Valve Block | Aco + pneumatic | Combina ar para motor + clamping pneumatico |
| Control Handles | Pneumatic / Hydraulic | 2 levers (left + right) para start/stop |
| Lifting Bail (Eye) | Aco liga forjado | Posicionamento vertical via crane / air hoist |
| Protective Frame / Guards | Aco estrutural | Protecao contra impactos / debris |
| Parametro | Valor / Opcoes |
|---|---|
| Padrao | API Spec 7K “Specification for Drilling and Well Servicing Equipment” |
| Material (Rollers) | High Manganese Steel (anti-impacto, alta dureza) |
| Material (Body) | Aco estrutural ASTM A36 soldado |
| Range Tubos | 2-7/8″ – 10″ (73 – 254 mm) ajustable |
| Working Pressure (Air / Hyd) | 0.5 – 0.9 MPa (72-130 PSI) / 14 MPa (2.000 PSI) |
| Max Brake Torque | 2.000 – 3.000 N.m (1.475 – 2.210 ft.lbf) por modelo |
| Spinner Speed | 0 – 90 / 0 – 120 / 0 – 95 RPM (depende do modelo) |
| Air Consumption | 10,3 – 15 m3/min (360 – 529 ft3/min) |
| Hydraulic Flow | 120-140 LPM (32-37 GPM) – modelo 300Y |
| Fluid Compatibility | Ar comprimido ou oleo hidraulico |
| Working Environment | Oleo, Lama, Agua (offshore / onshore) |
| Identification | Serial + data plate + EN 10204 3.1 MTC |
| Parametro | Q140-200 | Q254-250 | Q254-300Y |
|---|---|---|---|
| Drive Mode | Pneumatic | Pneumatic | Hydraulic |
| Range (mm) | 88.9 – 139.7 | 88.9 – 254 | 88.9 – 254 |
| Range (in) | 3-1/2 – 5-1/2 | 3-1/2 – 10 | 3-1/2 – 10 |
| Air Pressure | 0.5 – 0.9 MPa / 72-130 PSI | 0.5 – 0.9 MPa / 72-130 PSI | – |
| Hydraulic Rating | – | – | 14 MPa / 2.000 PSI |
| Max Brake Torque | 2.000 N.m / 1.475 ft.lbf | 2.500 N.m / 1.840 ft.lbf | 3.000 N.m / 2.210 ft.lbf |
| Spinner Speed | 0 – 90 RPM | 0 – 120 RPM | 0 – 95 RPM |
| Air Consumption | 10,3 m3/min / 360 ft3/min | 15 m3/min / 529 ft3/min | – |
| Hydraulic Flow | – | – | 120-140 LPM / 32-37 GPM |
| Dimension LxWxH | 1.400 x 530 x 835 mm | 1.250 x 570 x 465 mm | 1.100 x 560 x 700 mm |
| Weight | 378 kg / 833 lb | 440 kg / 970 lb | 400 kg / 880 lb |
| Aplicacao Tipica | Drill pipe / collar pequeno | Drill pipe 5″ – 10″ | HP drilling 10″ |
|
• Oil Drilling Rigs – make-up / break-out drill pipe standard operations • Gas Drilling Rigs – drilling gas wells com drill pipe 5″ – 10″ • Geothermal Drilling – operacoes de poco geotermico • Offshore Drilling Platforms – drilling floor em plataformas • Onshore Drilling – land rigs em operacao convencional • Workover Rigs – snubbing / pulling operations • Casing Running – auxiliar em conexoes de casing strings • Coring Operations – rotacao reversivel para coring • Drilling Trouble – tratamento de problemas (fishing jobs) • Tubular Handling – manuseio seguro de drill pipes / collars |
| Item | Especificacao |
|---|---|
| Function Test (operational) | Operacao pneumatic / hydraulic completo, ambos sentidos |
| Torque Test | Brake torque max medido + certificado |
| Pressure Test (Air Motor) | 1.5x working pressure, sem vazamento |
| Pressure Test (Hydraulic) | 1.5x working pressure 3000 PSI, sem vazamento |
| Clamping Force Test | Forca de clamping verificada em 3-1/2″, 5″, 7″, 10″ pipes |
| Roller Wear Test | Hardness test dos rolos (min HB 350) |
| Speed Test | RPM medido em carga nominal |
| Noise Level | Atende OSHA standards (drilling floor) |
| Certificado | EN 10204 3.1 MTC + API 7K traceability |
Cotacao por modelo + range tubos + drive mode
Solicitar Cotacao
WhatsApp +86 186 2172 3891
Envie suas especificações e receba uma cotação competitiva em até 24 horas
